Frequency of Blastocystis hominis and other intestinal parasites in stool samples examined at the Parasitology Laboratory of the School of Pharmaceutical Sciences at the São Paulo State University, Araraquara

Blastocystis hominis é um protozoário, causador de infecção intestinal denominada blastocistose humana, cujo diagnóstico é realizado pelo exame coproparasitológico e por meio de técnicas de coloração permanente. Este estudo foi desenvolvido para avaliar a freqüência da infecção por Blastocystis hominis em habitantes da região de Araraquara/SP, bem como comparar diferentes métodos para a pesquisa desse protozoário em amostras de fezes. Foram estudadas 503 amostras de fezes submetidas ao exame direto a fresco, às técnicas de Faust e cols, Lutz e de Rugai e cols, além das colorações pela hematoxilina férrica, tricrômio e de Kinyoun modificada. Entre as 503 amostras examinadas, 174 (34,6%) apresentaram-se positivas para a presença de parasitas intestinais. O protozoário e o helminto mais freqüentes foram Entamoeba coli (14,6%) e Strongyloides stercoralis (6,7%), respectivamente. Blastocystis hominis foi observado em 23 (4,6%) amostras fecais com consistência predominantemente pastosa, não caracterizando quadro diarréico. Apesar da baixa freqüência de Blastocystis hominis encontrada na região de Araraquara, comparativamente a outras regiões brasileiras, é importante a realização do diagnóstico laboratorial desse protozoário. O encontro de Blastocystis hominis em material fecal é indicativo de contaminação de alimentos e água de consumo, desde que se admita a rota de transmissão oral-fecal desse parasita, o que implica na orientação da população sobre as medidas de saneamento básico e higiene como meio para se controlar problemas de saúde ocasionados pelos enteroparasitas.

A simple and portable instrument for determination of captopril in pharmaceutical formulations

Objective: This article describes the application and the performance of a cheap, simple and portable device that can be used for colorimetric quantitative determination of captopril (CPT) in pharmaceutical preparations. Methods: The sensor is a light detector resistor (LDR) placed into a black PTFE cell and coupled to a low cost multimeter (Ohmmeter). The instrument has been tested and is easy and fast to use. The quantitative study is based mainly on reduction of ammonium molybdate by captopril, in the presence of sulphuric acid, producing a green-yellow compound (max 407 nm). The calibration curves were obtained by plotting the electric resistance of the LDR against the CPT concentration on the range of 4.60 x 10-4 to 1.84 x 10-3 mol l-1 with a good coefficient of determination (R2 = 0.9962). Results: Statistical analysis of the obtained results showed no significant difference between the proposed methodology and the official reported method as evident from the t-test and variance ratio at 95% confidence level. Conclusion: The results of this study demonstrate that the instrument can be used for simple, accurate, precise, fast, in situ and low-cost colorimetric analysis of captopril in pharmaceuticals products.

Safety Assessment of Potentially Inappropriate Medications (PIM) use in Older People and the Factors Associated with Hospital Admission

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

LC-DAD Determination of Fleroxacin in Bulk and Pharmaceutical Dosage Forms

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Assessment of the chemical profile, polyphenol content and antioxidant activity in extracts of Psidium Guajava L. fruits

Fruits and vegetables that are rich in polyphenolic compounds, especially flavonoids, may be used to benefit human health by reducing the incidence of cancers and cardiovascular diseases. Previous studies have demonstrated the antioxidant activity of guava, a fruit widely available in Brazil, possibly due to the presence of these polyphenolic compounds. The aim of this study was to analyze the total phenolic and flavonoid contents of various guava extracts, assay their antioxidant activity and record the chromatographic profiles of these extracts, to determine a simple and low way of extracting these compounds efficiently from guava. The results confirmed the presence of polyphenols in guava, including flavonoids, and its antioxidant activity. Furthermore, it was demonstrated that the 70% ethanol (by volume) was the most effective solvent to extract these compounds from the fruit, among those tested.

Microbiological control of moisturizing mask formulation added of hibiscus flowers, assai palm, black mulberry and papaw glycolic extracts

The microbiological control of moisturizing mask formulation added of hibiscus flowers, assai palm, black mulberry and papaw glycolic extracts, determining the number of viable microorganisms and possible presence of pathogenic. The moisturizing mask formulation was composed of zinc oxide (5. 0%) and moisturizing cream constituted of triceteareth-4 phosphate (and) cetyl alcohol (and) stearyl alcohol (and) sodium cetearyl sulfate (and) oleth-10 (qs 50g). To this formulation was added hibiscus flowers glycolic extract (2. 5%), assai palm glycolic extract (1. 5%), black mulberry glycolic extract (1. 5%) and papaw glycolic extract (2. 0%). The formulation was stored in aseptically clean recipients, away from humidity and light, in fresh and airy places. The results of the microbiological analysis on the counting of aerobic mesophilic microorganisms (bacteria and fungi), of the above mentioned formulation, revealed a bioburden < 10 CFU/mL in all samples. Such data indicate adequate microbiological quality of the tested products, according to official recommendations. Furthermore, it was not detected the presence of pathogenic microorganisms, assuring the harmlessness of the formulation. The results lead us to conclude that the formulation and raw materials analyzed did not present microbial contamination, evidenced for estimating the number of viable microorganisms (<10 UFC/g) and for researching pathogens.

Development and sensory analysis of shampoo for curly hair

Objective: This study aimed to compare the sensory performance of a shampoo formulation with Polyurethane-14, AMP-acrylates copolymer (PAAC) in relation to control formulation in curly and natural hair tresses. Methods: Curly and natural hair tresses (n = 8) of equal size and weight were pre-treated by washing with a standard shampoo. After the hair tresses were treated with a formulation containing polymer (formulation A) and compared to hair tresses treated with control formulation (Formulation B). Each panelist (n=2) is asked to indicate which tress performs better for each of seven sensory attributes evaluated (quantity and creamy foam, combing, wet touch, frizz formation, curl definition and volume). It was collected images of hair tresses at 0, 1, 2, 4 and 24 hours of washing, comparing the attributes: volume, frizz formation and curl definition. The results were analyzed using table to test of paired assessment, being: SUPERIOR results - 8 and 7 positive evaluations; SIMILAR results - 2 to 6 positive evaluations; INFERIOR results - 1 and 0 positive evaluations. Results: The addition of the PAAC on the shampoo formulation provided definition and modeling of curls, reducing volume and frizz in 24 hours. There was also lower foam formation in the formulation with polymer PAAC. However, it is important to note that this attribute has inversely proportional effect to the creamy foam, since more creamy foam, smaller quantity. Conclusions: It was concluded that the shampoo developed was effective in defining and modeling curl in natural and curly hair.

Pharmacology and biochemistry undergraduate students'concern for a healthy diet and nutrition knowledge

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Rheological characterisation and effect of abiotic factors on the antimicrobial efficacy of chitosan-based hidrogels containing alpha-hydroxy acids

The aim of this study was to investigate the rheological properties and antibacterial efficacy of chitosan/ alpha-hydroxy acids (lactic acid and glycolic acid) and cellulose polymers, both in hydrogels, in order to produce a formulation with improved activity against Propionibacterium acnes and Staphylococcus aureus, which can potentially be used in the treatment of acne. The rheological characterisation of the hydrogels was examined using continuous shear and viscoelastic creep. The antibacterial activities of formulations were performed by the well diffusion and broth microdilution. The hydrogels formulated with only chitosan showed pseudoplastic behavior while the chitosan hydrogels with cellulose polymers presented viscoelastic properties. The antibacterial activity was proportional to AHA and chitosan concentration. It was enhanced at low pH values and with high molecular weight chitosan and did not change with the incorporation of two cellulose polymers. The antibacterial mechanism of chitosan has currently been hypothesized as being related to surface interference. The results show that chitosan - based hydrogels containing AHA and cellulose polymers are viscoelastic,indicating good applicability onto the skin, and they present bacterial activity under various experimental conditions.

Quality control of cosmetics containing Calendula officinalis, Melampodium divaricatum, Matricaria chamomila linné and Acchilea millefolium extracts

The use of medicinal plants occurs since the Antiquity, but has become more popular in the present time. In the United States, 50% of the population uses the phytotherapy. Calendula officinalis and Melampodium divaricatum have components called flavonoids. Matricaria chamomila Linn and Acchilea millefolium, popularly known as camomila and mil folhas, respectively, have sesquiterpenic components called azulens. These substances present many effects; some of them offer benefits to the human health. Thus, these plants had their extract incorporated in cosmetic-dermatological formulations. This study aimed to prove the presence of the active substances, sesquiterpenes and flavonoids, in cosmetic creams with Matricaria chamomila Linn, Acchilea millefolium, Calendula officinalis and Melampodium divaricatum extracts. Also, aimed to evaluate the microbiological quality of the products. Flavonoids and sesquiterpernes were detected in the emulsions and the microbiological quality was verified. Thus, the products are safe to the users in relation to the microbiological aspects and should present beneficial effects due to the presence of flavonoids and sesquiterpenes.

Development of an anti-aging cream with AHA/BHA and sunscreens

The skin aging is a matter of discomfort verified in the population. Thus, every day, new products are launched on the market to offer different manners to prevent the premature aging of the skin. In this context, active substances, as alpha and beta hidroxyacids (AHA/BHA), beyond the sunscreens, are considered a way of prevention and amelioration of the effects caused in the skin due to the time. The aim of this study was to develop and evaluate a cosmetic cream containing AHA/BHA and sunscreen. It was studied in relation to its physical-chemical and microbiological characteristics. According to the results, the formulation developed present a shelf life of 758 days and the preservative system was effective. Considering the parameters evaluated, the cream probably would be commercially accepted.

Comparative study over methods developed for quantification of darunavir in tablets by environmental friendly infrared and capillary electrophoretic techniques

Darunavir, a protease inhibitor used in the treatment of HIV infection, presents few methods for its determination in pharmaceuticals. Infrared (IR) spectroscopy offers the possibility of obtaining spectra relatively quickly, providing interesting information, analytically, qualitatively or quantitatively. Capillary electrophoresis (CE) performs separations of high efficiency in shorter time with reagents and samples in small quantity. These two methods are cost-benefitted when we evaluate the green level and the cost of analysis. Faster and cheaper methods without generating organic waste by IR and CE for the quantification of darunavir were developed and validated, focusing socioeconomic impact of analytical decisions. If the cost of acquisition, maintenance, production, analysis and conditioning of drugs and pharmaceuticals is high, consequently the price of this product in the market will be higher and it cannot be accessible to the patient. Treatment failure not only affects the quality of life of patients, but also contributes significantly to the economic burden of the health system. In this context there is a tool called Analysis of the Life Cycle, which comes to make us think in a multidimensional way focusing the whole, the parts and especially the interaction among the parts of a system.

Development and validation of an economic, environmental friendly and stability-indicating analytical method for determination of ampicillin sodium for injection by RP-HPLC

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Development of an innovative, ecological and stability-indicating analytical method for semiquantitative analysis of ampicillin sodium for injection by thin layer chromatography (TLC)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)